Jupiter Confirmed as Australia's Largest MREO Clay Resource
Released
Released
Announcement PDF
13 August 2025
ASX: CRI
JUPITER CONFIRMED AS AUSTRALIA’S LARGEST
MAGNET RARE EARTH CLAY HOSTED RESOURCE
The Board of Critica Limited (ASX: CRI) (“Critica” or “the Company”) is pleased to announce that the latest phase of work
at Jupiter marks what the Company considers a step-change in understanding the project’s value potential. The review has
defined zones enriched in the key Magnet Rare Earth Oxides (MREOs) - the elements that, according to industry
commentary, can contribute the vast majority, of rare earth project value at prevailing market prices¹.
Building on the July 2025 HREO review, Critica has identified multiple higher-grade MREO zones containing neodymium,
praseodymium, dysprosium and terbium, the four rare earths essential for high-performance permanent magnets.
MREO-Rich Zones Confirmed
Reporting the February 2025 resource using MREO cut-offs confirms Jupiter as Australia’s largest and highest-grade clayhosted MREO resource². At a 400 ppm MREO cut-off, Jupiter contains 640 Mt at 490 ppm MREO (refer to Table 1) and
2,100 ppm TREO within the broader 1.8 Bt global resource. This highlights Jupiter’s scale and its concentration of high-value
magnet REEs that support long-term demand from sectors including EVs, wind turbines, medical and defence.
HIGHLIGHTS
• MREO resource review complete – MREO-focused cut-offs applied to define zones enriched in Nd, Pr, Dy,
Tb.
•
Magnet-rich zones – 640 Mt at 490 ppm MREO (400 ppm cut-off) containing ~310,000 t in-situ MREOs
within the 1.8 Bt global resource.
•
Reported as Australia’s largest clay-hosted MREO resource – based on publicly available peer data2.
•
Beneficiation test work – upgraded feed to 15,000 ppm TREO with ~95% mass rejection under laboratory
conditions.
•
Low U/Th mineralisation – combined with early mass reduction, may support ESG outcomes and
streamline permitting processes.
•
Tier-1 location – Western Australia with established infrastructure and regulatory stability.
•
Market reference – US$110/kg NdPr floor price set by the U.S. Department of Defense for MP Materials
Corp (Reuters, July 2025).
Why MREO Content Matters Most
MREO content is widely regarded as the single most important value driver in rare earth projects¹. The four key
elements - neodymium (Nd), praseodymium (Pr), dysprosium (Dy) and terbium (Tb) - are critical for highperformance permanent magnets used in EVs, wind turbines, electronics, medical devices and defence
systems. Although they account for only a small fraction of total TREO content, industry commentary frequently
notes that these magnet rare earths can contribute the vast majority, in the order of 85% or more, of total basket
value at prevailing market prices, making them among the most strategically sought-after rare earths globally¹.
1.
2.
International Energy Agency, The Role of Critical Minerals in Clean Energy Transitions, 2021; USGS, Mineral Commodity Summaries: Rare Earths, annual
editions.
Based on publicly available peer data – see Appendix A.
CRITICA LIMITED Level 2, 16 Altona Street, West Perth, Western Australia
ABN 51 119 678 385 | T: +61 8 6279 9428 | F: +61 8 6500 9986 | admin@critica.limited | www.critica.limited
1
13 August 2025
ASX: CRI
Next Steps
This work marks the start of a focused development approach built around the rare earths most important to downstream
users. The results highlight Jupiter’s potential dual advantage of scale and selectivity - supporting both long-life
production potential and the possibility of an early-stage, higher-value development core, subject to further technical
and economic studies.
Critica will now incorporate the MREO review results into the next phase of technical and commercial work for the Jupiter
Project, including:
•
•
•
•
•
MREC production pathway – planned metallurgical test work to assess the potential for producing Mixed Rare
Earth Carbonate (MREC), subject to future pilot-scale validation.
Bulk sample collection and resource update to support pilot-scale metallurgical test work.
Pilot program to validate beneficiation and leach performance under scaled operating conditions.
Scoping study assessing high-value MREO zones and a streamlined process design.
Engagement with potential strategic offtake partners seeking secure, ESG-aligned magnet REE supply.
Critica’s CEO Jacob Deysel comments: “This is a turning point in the Jupiter story. The size of the resource has always
been compelling, but this updated analysis confirms that Jupiter also has quality, with significant quantities of neodymium,
praseodymium, terbium and dysprosium. This makes Jupiter Australia’s largest and highest-grade clay-hosted rare
earth deposit by both total tonnage and contained MREOs.
What sets Critica apart is our approach. Rather than rushing toward an end product at all costs, we are
systematically and innovatively advancing our metallurgical plan. We are applying a smarter, more targeted
strategy, starting with a beneficiation stage that has upgraded high-value REEs into a small-volume stream while
rejecting ~95% of the mined mineralised mass.
This approach has the potential to deliver a significant advantage compared to projects requiring full-volume
leaching. By removing this stream early, we are improving our pathway to more efficient processing and potential
economic benefits, reducing the volume of material requiring chemical processing. That, in turn, has the
potential to materially lower the scale, complexity and environmental footprint of downstream operations. It’s a
foundational advantage that sets Jupiter apart and supports a more capital-efficient, sustainable development
pathway.
This isn’t just good for economics – it’s the right way to build a modern rare earths business: scalable, responsible and
strategically aligned. As we move toward pilot work and scoping, we are focused on unlocking value with discipline, pace
and technical precision. Jupiter has the potential to become a cornerstone of Australia’s rare earth supply chain, and we
are shaping it for that role from day one.”
CRITICA LIMITED Level 2, 16 Altona Street, West Perth, Western Australia
ABN 51 119 678 385 | T: +61 8 6279 9428 | F: +61 8 6500 9986 | admin@critica.limited | www.critica.limited
2
13 August 2025
ASX: CRI
High-Impact Zones Defined Through Strategic Modelling
Critica has applied targeted MREO-focused cut-off grades to the 1.8 Bt Jupiter Inferred Mineral Resource as published to
the ASX on 11 February 2025 , identifying zones enriched in neodymium, praseodymium, terbium and dysprosium - the
four rare earths critical to high-performance permanent magnets for EVs, wind turbines, medical and defence systems.
•
•
•
Resource: ~640 Mt at 490 ppm MREO (400 ppm MREO cut-off) (refer to Table 1)
Contained MREO: 310,000 tonnes in-situ
Represents a large-scale, high-value zone aligned with market demand for magnet REEs
Figure 1: Jupiter Leads on MREO Scale and Grade Among Australian Clay-Hosted Peers
This “quality within quantity” profile highlights Jupiter’s potential to combine global-scale tonnage with a highvalue magnet REE core.
Refer to Appendix A: Source data for Peer Comparisons. (Differences in reporting methodology and cut-off grades may
apply.)
CRITICA LIMITED Level 2, 16 Altona Street, West Perth, Western Australia
ABN 51 119 678 385 | T: +61 8 6279 9428 | F: +61 8 6500 9986 | admin@critica.limited | www.critica.limited
3
13 August 2025
ASX: CRI
Table 1 | Jupiter Inferred Mineral Resource (February 2025) reported by Magnet Rare Earth Oxide (MREO) cut-offs
(rounded to 2 significant figures).
Cut-off
Tonnage
MREO
TREO
Pr6O11
Nd2O3
Tb4O7
Dy2O3
MREO ppm
Mt
ppm
ppm
ppm
ppm
ppm
ppm
250
1,700
390
1700
83
289
3
15
300
1,400
410
1800
87
305
3
15
350
1,000
450
1900
94
331
3
16
400
640
490
2100
103
363
4
18
450
360
540
2300
114
400
4
19
500
200
590
2500
125
440
4
20
550
110
640
2700
136
480
5
22
600
64
700
2900
148
519
5
24
Table 2 | Jupiter Inferred Mineral Resource (February 2025) Magnet Rare Earth Oxide endowments (rounded to 2
significant figures).
Cut-off
MREO
Pr6O11
Nd2O3
Tb4O7
Dy2O3
MREO ppm
tonnes
tonnes
tonnes
tonnes
tonnes
250
660,000
140,000
490,000
5,100
25,000
300
590,000
120,000
440,000
4,500
22,000
350
450,000
96,000
340,000
3,500
17,000
400
310,000
66,000
230,000
2,300
11,000
450
200,000
41,000
150,000
1,400
6,900
500
120,000
25,000
87,000
840
4,000
550
72,000
15,000
54,000
510
2,400
600
44,000
9,400
33,000
310
1,500
1.TREO represents the sum of 14 Rare Earth Elements excluding promethium plus yttrium expressed as oxides
2.MREO represents the sum of neodymium, praseodymium, dysprosium and terbium expressed as oxides
2.HREO represents the sum of the gadolinium, terbium, dysprosium, holmium, erbium, thulium, ytterbium, lutetium and yttrium as oxides
CRITICA LIMITED Level 2, 16 Altona Street, West Perth, Western Australia
ABN 51 119 678 385 | T: +61 8 6279 9428 | F: +61 8 6500 9986 | admin@critica.limited | www.critica.limited
4
13 August 2025
ASX: CRI
Figure 2: High-Grade MREO Core Defined Within Jupiter’s 1.8 Bt Inferred Resource illustrating the potential for selective
development scenarios that may target higher-value zones while retaining the scale for long-life supply, subject to further
technical and economic studies.
INDEPENDENT MINERAL RESOURCE ESTIMATION DETAIL
The following is a material information summary relating to the MRE, consistent with ASX Listing Rule 5.8.1
requirements. Further details are provided in JORC Code Table 1, which is included as Appendix B.
Strategic Project Location and Accessible Infrastructure
Discovered in late 2023, the Jupiter high grade clay-hosted rare earth deposit is part of Critica’s wholly owned
Brothers project. The Brothers project spans approx. 1,500 km2 of semi contiguous granted tenure located
CRITICA LIMITED Level 2, 16 Altona Street, West Perth, Western Australia
ABN 51 119 678 385 | T: +61 8 6279 9428 | F: +61 8 6500 9986 | admin@critica.limited | www.critica.limited
5
13 August 2025
ASX: CRI
approximately 550 kilometres northeast of Perth and 60 kilometres west of Mount Magnet in Western Australia
(Figure 3).
Jupiter benefits from well-established infrastructure, enhancing its development potential. The project is
strategically located within the Mt Magnet – Yalgoo area, a premier mining district of Western Australia. It is less than
10 kilometres from the Mount Magnet-Geraldton bitumen highway, providing direct access to local labour centres
and the Port of Geraldton. Access to the project area from the bitumen highway is via unsealed tracks through the
two crown pastoral lease stations that overlap the Brothers tenements. The terrain at Jupiter is flat, sparsely
vegetated and facilitates year-round access.
The mid-west gas pipeline runs parallel to the Mount Magnet-Geraldton highway, past the project site and
transmission power lines run within 40 kilometres of the site to the south-west.
A preliminary heritage survey was completed, and no Aboriginal cultural sites or materials were identified with the
site deemed a low-risk area.
Figure 3| Brothers and Jupiter Project Location Map
Project History
The Jupiter target was originally identified by geophysics with coincident aeromagnetic and gravity anomaly coupled
with anomalous rare earth element results from two co-funded EIS drill-holes drawing Critica geologists into the
area. First pass Air Core (“AC”) drilling of the Jupiter target along existing pastoral tracks was completed in June
2023 with every drill-hole reporting significant rare earth mineralisation within clay and saprolite zones. The grades
and thicknesses reported were considered high compared to other known Australian clay-hosted rare earth deposits
at the time. The discovery of the Jupiter REE deposit was announced to the market in November 2023. Following the
CRITICA LIMITED Level 2, 16 Altona Street, West Perth, Western Australia
ABN 51 119 678 385 | T: +61 8 6279 9428 | F: +61 8 6500 9986 | admin@critica.limited | www.critica.limited
6
13 August 2025
ASX: CRI
Jupiter discovery Critica conducted geophysical surveys (gravity and magnetics) and several RC and AC drilling
campaigns which delineated an area of 40 square kilometres of high-grade, clay-hosted rare earth mineralisation.
The consistent, broad zones of mineralisation up to 80 metres thick, with grades above 1,000 ppm TREO were
identified.
In 2024, two resource definition programs comprising 508 AC holes for 29,772 metres were drilled across the Jupiter
project area. The first program defined the Jupiter mineralisation to a 500 x 250 metre line spacing. The second
program infilled areas with thick intersections of >2,000 ppm TREO to a 250 x 250 metre drill spacing. The resulting
information was utilised by SRK Consulting to produce an independent MRE for Jupiter.
Geology and Geological Interpretation
The Jupiter deposit is located within the Archaean Murchison Domain of the Youanmi Terrane, Yilgarn Craton. The
Murchison Domain comprises narrow belts of supracrustal greenstones, the large layered mafic–ultramafic Meeline
and Boodanoo suite intrusive complexes in the east, and voluminous granitic rocks emplaced between c. 2.7 Ga
and 2.6 Ga. The extensive granitic rocks are divided into the Cullculli Suite (tonalite-trondhjemite-granodiorite), Big
Belle Suite (tonalite-monzongranite), Tuckanarra Suite (granodiorite-monzogranite), Jungar (K-feldspar-porphyritic
monzogranites) and the Bald Rock Supersuite (monzogranite and fluorite bearing alkaline granite).
The Archaean basement throughout the Jupiter area is generally deeply weathered and extensively covered by
Cenozoic alluvial and colluvial sand and gravel, laterite and lateritic gravels on breakaways and uplands. The Jupiter
REE deposit and associated intrusion itself is completely concealed by alluvial and colluvial sand and hardpan
within an area currently interpreted to be underlain by Big Bell Suite granitoids.
Regolith thickness is up to 100 metres across the entire extent of the Jupiter geophysical anomaly that is extensively
mineralised at the >1,000 ppm TREO level. The regolith comprises of three main zones which are described below in
Table 3.
Table 3 | Jupiter Regolith Profile description
Regolith
Cover Zone
(SAND)
Clay Zone
(RCLY)
Saprolite Zone
(RSAP)
Thickness
Description
1-35m
Alluvial and colluvial sand and gravel, extensively cemented and commonly laminated
microcrystalline silica and lesser iron oxides. Gravel clasts comprise largely deeply
weathered granitoids, and vein or pegmatite quartz, while the sand comprises iron-oxide
stained rounded to sub angular quartz. A well washed quartz sand or grit is present in
many areas at the base of the transported cover. Clay content typically increases with
depth, and in areas without a distinct basal sand unit the boundary with the underlying in
situ Clay Zone is difficult to visually distinguish. Hyperspectral logging shows a mixture
of montmorillonite and kaolinite clay in the Cover Zone.
<60m
Kaolinitic clay (upper saprolite) with a variable content of sand-sized relict quartz
reflecting protolith (which ranges from quartz-free syenite to granite). Colour ranges from
white to dark ferruginous red brown, through to white or pink in the middle part of the Clay
Zone (bleached) to yellow and brown in the lower part. An element of protolith control is
also apparent with white and yellow kaolinite typically better developed over monzonite
and granite protoliths with <20% ferromagnesium mineral content, and red brown clays
developed over monzonite, syenite and alkali gabbro with >20% ferromagnesium mineral
content. Ferricrete and silcrete zones are locally developed. Hyperspectral logging
shows kaolinite is the dominant and commonly only volumetrically significant clay
mineral.
<40m
Saprolitic clay with feldspar increasing down-hole, and depending on the protolith an
increase of magnetite, biotite, amphibole, epidote and chlorite down hole towards fresh
basement. Hyperspectral logging shows declining kaolinite and increasing nontronite
and relict primary phases towards base of the saprolite. Relict igneous minerals and
texture is increasingly evident through the Saprolite Zone. The upper contact between
Saprolite and Clay zones is texturally difficult to visually pick in AC and RC cuttings but
the transition is usually conspicuous with a sharp increase from <1% K to several % K in
the Saprolite Zone reflecting presence of relict potassium feldspar, a major rock former
in most Jupiter protoliths.
CRITICA LIMITED Level 2, 16 Altona Street, West Perth, Western Australia
ABN 51 119 678 385 | T: +61 8 6279 9428 | F: +61 8 6500 9986 | admin@critica.limited | www.critica.limited
7
13 August 2025
ASX: CRI
Bottom of hole (near fresh) and RC hammer drilling shows the basement beneath the Jupiter clay-hosted REE
deposit comprises a zoned, heterogeneous medium to coarse grained intrusion that ranges from alkali gabbro and
pyroxene syenite through monzodiorite and monzonite to granite. Geological logging and classification is
complemented with a full-suite of bottom of hole multi-element geochemical data collected from every drill-hole.
Mineralogy
Clay-hosted REE and gangue mineralogy is typically very fine grained and required microanalytic techniques to
resolve. Currently, mineralised regolith samples from Jupiter have been analysed by TIMA (Tescan Integrated Mineral
Analyzer) to establish mineralogy (via a mineralogical library) and key grain size and liberation characteristics.
Selected Jupiter TIMA samples were further analysed by LA-ICPMS (Laser Ablation Inductively Coupled Plasma Mass
Spectrometry) and EPMA (Electron Probe Micro Analysis) to verify and determine the compositions of the TIMA
identified REE phases and gangue minerals.
This microanalytical work shows the REE-phosphates Florencite-Gorceixite-Goyazite, Rhadophane-Monazite and
Xenotime to be the dominant REE phases in the Jupiter regolith. Florencite (REE)Al 3(PO4)2(OH)5(OH)6 - Gorceixite
(Ba,REE)Al3(PO4)(PO3OH)(OH)6 - Goyazite (Sr,REE)Al3(PO4)2(OH)5(OH)6 are hydrated phosphates with solid solution
between barium, strontium and REE end members. Rhabdophane REE(PO 4).(H2O) is a hydrated form of monazite
REE(PO4), and it is likely that hydrated forms of the identified Xenotime (Y,HREE)PO 4 will also be present. Dominant
gangue minerals are quartz, magnetite, hematite, feldspar, kaolinite, epidote, biotite, muscovite, illite, chlorite,
barite, rutile, titanite, ilmenite, Mn-oxides, zircon and apatite.
Drilling Techniques
Air Core drilling was completed by KTE Drilling using a Challenger RA 150 Air Core rig mounted on a 4 x 4 MAN truck
with inbuilt 600 CFM at 250 psi compressor. Drilling was completed using a 3.5” drill bit with blade. All holes were
drilled vertically and to blade refusal.
Reverse Circulation drilling was completed by KTE Drilling using a DB450 mounted on an 8 x 8 Scania truck with on
board 1150/350 air compressor. All holes were drilled vertically to at least fresh rock with some holes extending up
to 20 metres into the fresh rock.
Diamond drilling was completed by DDH1 using a Sandvik DE840 truck mounted drill rig. Holes were drilled at -70o.
Down-hole surveys were collected at 30 metre intervals. Results from the diamond drilling are still pending at the
time of resource calculation and have not been included in the resource calculation. A summary of the drill-holes
completed by Critica are outlined in Table 4.
CRITICA LIMITED Level 2, 16 Altona Street, West Perth, Western Australia
ABN 51 119 678 385 | T: +61 8 6279 9428 | F: +61 8 6500 9986 | admin@critica.limited | www.critica.limited
8
13 August 2025
ASX: CRI
Table 4| Jupiter Drill-hole Summary
Drill Program
Year
No. Holes
Metres
Brothers AC: Phase 1
4
218
Jupiter AC: Phase 1
29
1,808
25
1,794
52
3,252
246
14,376
262
15,396
Jupiter DD: Phase 1
7
819.4
Total
625
37,663.4
Jupiter RC: Phase 1
2023
Jupiter RC: Phase 2
Jupiter AC: Phase 2
Jupiter AC: Phase 3
2024
Sampling
AC and RC samples were collected directly from the rig cyclone underflow at one metre intervals and stored into
plastic bags at the drill site. The sticky nature of the clay materials and variability in fragment size precluded the
effective use of cone or riffle splitting for sampling. Spear sampling was used to collect a subsample from each
interval and used to prepare field composites that typically comprised of four metres (ranging 2 to 6m) weighing 2kg
to 3kg. Duplicate samples were collected in sequence with the primary samples to monitor sampling consistency
and ensure that the sampling method was suitable for this ore-type. No issues were identified.
Sample Analysis and Methods
Samples were dispatched to ALS (Canningvale and Wangara, WA) for geochemical testing. Samples weighing 2-3 kg,
were processed using conventional sample preparation procedures, comprising oven-drying, crushing and then
pulverising to a split of P95 passing 75 µm.
For all samples a total of 34 elements (Ag, Al, As, Ba, Be, Bi, Ca, Cd, Co, Cr, Cu, Fe, Ga, K, La, Li, Mg, Mn, Mo, Na, Ni,
P, Pb, S, Sb, Sc, Sr, Th, Ti, Tl, U, V, W and Zn) were analysed using a four-acid digest with an Inductively Coupled
Plasma – Atomic Emission Spectroscopy (ICP-AES) finish (ME-ICP61).
For samples exceeding La > 100 ppm and elevated P, a total of 32 elements (Ba, Ce, Cr, Cs, Dy, Er, Ga, Gd, Hf, Ho,
La, Lu, Nb, Nd, Pr, Rb, Sc, Sm, Sn, Sr, Ta, Tb, Th, Ti, Tm, U, V, W, Y, Yb and Zr) were analysed by fusing a 0.1g
pulverized sample with a lithium metaborate flux (ME-MS81). The resultant glass was dissolved in nitric,
hydrochloric and hydrofluoric acid mixture. The solution was then analysed by Inductively Coupled Plasma – Mass
Spectrometry (ICP-MS).
For reporting purposes rare earth elements have been expressed in their oxide form. The factors used to convert the
rare earth element grades to their oxide grades are outlined in Appendix B – Section 2.
Quality Assurance and Quality Control Procedures
The data collection programs include a comprehensive set of quality assurance and quality control (QAQC)
procedures including twinned hole drilling, independent laboratory checks, and the insertion (by Critica) of
standards, field duplicates and blanks into the primary submission batches. Field and laboratory sample weights
were recorded and monitored. Periodic grinding checks were also conducted by the laboratory. Descriptions of the
QAQC procedures and results are summarised below in Table 5.
CRITICA LIMITED Level 2, 16 Altona Street, West Perth, Western Australia
ABN 51 119 678 385 | T: +61 8 6279 9428 | F: +61 8 6500 9986 | admin@critica.limited | www.critica.limited
9
13 August 2025
ASX: CRI
Table 5 | Summary of QAQC procedures and results
QAQC Procedure
Description
Drill-hole twinning
All drilling techniques can be susceptible to grade biases due to preferential material loss. Critica
twinned 3 AC holes with RC holes and observed reasonable correlation in grade and in domain
definition. The seven diamond core holes described above are proximal to existing RC and AC holes.
Critica plans to use the assay data from these holes to assist with the validation of the RC and AC data
once the laboratory test work has been completed.
Field Duplicates
The field duplicates comprised scoop samples collected from the composites at a nominal frequency
of approximately 1 in 20. The duplicate dataset also includes 77 samples that were resubmitted as a
separate batch to ALS.
Critica used scatterplots, QQ plots, and precision plots to assess the duplicate datasets. The QAQC
graphs and summaries made available to SRK show acceptable performance. The scatterplots and
QQ plots show no evidence of significant bias. The HARD (half average relative difference) plots show
acceptable levels of precision have been achieved, with over 90% of the pairs reporting a HARD of less
than 10% for most analytes.
Spearing and scooping are generally not considered to be reliable sampling methods. However, the
duplicate datasets do not show that these methods have introduced significant sampling error for the
analytes of interest.
Standards
Standards were routinely included in the laboratory submissions at a nominal frequency of 1 in 20. A
total of 5 different Standards were used, with 4 purchased from OREAS and 1 purchased from
Geostats Pty Ltd.
Summary control charts prepared by Critica show acceptable Standards performance, with
relatively low failure rates and appropriate monitoring and response when failures are detected.
Some biases are evident with most REE reporting slightly below their Certified values for all
Standards. Most of the differences are less than 5%.
Independent
Laboratory Checks
Critica submitted batches of pulp samples to independent laboratories for confirmatory testing. A
batch of 100 pulp samples was sent to Intertek (Maddington) which assayed for a 45 element suite
using lithium borate fusion with a ICP – OES/MS finish. The same batch of 100 pulps was then
submitted to Bureau Veritas (South Australia) which completed a 32 element suite using lithium
borate fusion with an ICP – MS finish. Analysis of the results showed very good agreement was
achieved between the 3 laboratories, with no evidence of significant bias or precision differences.
Blanks
Blanks samples were inserted into the laboratory batches by ALS as part of their internal QAQC
procedures at a nominal frequency of 1 in 20. The source, form, or certification of the blanks is not
described. Several REEs reported at least 1 failure, with the highest rate being Lu (3.8%). Critica
considers that the failures are likely due to analytical error and not sample contamination given that
the higher failure rates are associated with elements with the lowest concentrations, and the failures
for any given sample are generally limited to 1 or 2 analytes.
Surveys
All data used for resource estimation are reported using MGA94 Zone 50 coordinate system, with
elevations based on the Australian Height Datum. The topographic dataset for the deposit region was
acquired from open source 30 m gridded SRTM data. The collar locations were surveyed using
handheld GPS to a reported accuracy of +/- 5m. SRK noted that all drillhole collar elevations were
within 0.5m of the topographic surface elevations and no adjustments were applied. All of the RC and
AC holes were vertical and relatively shallow and downhole surveying was not performed. The
diamond core holes, which were all nominally angled at 70°, were downhole surveyed at 30 m intervals
using gyro equipment.
Density Determination
Density data was derived from tests performed on core samples collected from seven diamond core holes drilled in
2024. The holes were drilled using PQ3 coring equipment through the weathered zone, stepping down to HQ3 once
fresh rock was intersected. The drill-holes were broadly spaced over the strike extent of the deposit. Density tests
were performed using the following techniques:
•
388 Caliper density measurements were performed on competent core pieces ranging in length from 10 cm to 1
m. The dimensions were measured prior to oven drying at 105oC for 24 hours, with density calculated from the
dry weights and estimated volume.
•
The core samples were processed using a Minanalyzer core scanner. This equipment uses laser scanning to
estimate the volume of core samples stored in core trays. The core trays were weighed, oven dried, and then
CRITICA LIMITED Level 2, 16 Altona Street, West Perth, Western Australia
ABN 51 119 678 385 | T: +61 8 6279 9428 | F: +61 8 6500 9986 | admin@critica.limited | www.critica.limited
10
13 August 2025
ASX: CRI
reweighed, with the density estimated from the dry core weight and estimated core volume. A total of 258 trays
were scanned (equating to 704 metres) of which 131 tray measurements were deemed acceptable.
•
A total of 85 water immersion tests were performed. Sample sealing was not performed and the tests were
conducted on fresh rock fragments only.
Critica compiled and compared the density test results and noted acceptable agreement between the various test
methods. Based on the synthesis of the results, the dry in situ bulk densities shown in Table 6 were chosen by
Critica and assigned to the resource model according to lithological flagging.
Table 6 | Dry bulk densities
Lithology
Dry Bulk Density (g/cm3)
Transported Cover
1.90
Upper Saprolite – Clay
1.65
Lower Saprolite
2.00
Fresh Rock
2.80
RESOURCE ESTIMATION METHODOLOGY
The Jupiter MRE was prepared by SRK and is based on AC and RC drilling. The data cut-off for input into the MRE was
15th November 2024, when final assays were returned from the infill resource definition drilling.
Geological Domains
Critica used a combination of geochemical data, geological logging data and hyperspectral mineralogical data to
divide the regolith profile into the following sub-horizontal lithological zones (from surface down):
•
Overburden (LCODE = 10)
•
Clay Zone (LCODE = 30)
•
Saprolite Zone (LCODE = 40)
The lithology domain contacts are reasonably well-defined by either step or transitional changes in multiple major
oxide grades. In general, the overburden zone is only weakly mineralised (~150 ppm TREO). The TREO grades are
often depleted in the upper parts of the clay zone but increase with depth, with a high-grade core often straddling
the Clay and Saprolite Zone contact. The TREO grades then tend to trend lower with depth into the saprolite and
fresh rock.
Although there is a broad correlation between the lithological domaining and TREO grade, the lithological domains
are not considered adequate for REO estimation control because they show mixed populations. SRK has instead
defined estimation domains based on TREO grade. Based on visual and statistical assessments o
Share your feedback
Discover