Jupiter Hydromet Cuts Acid Consumption by Approximately 30%
Released
Released
Announcement PDF
ASX Announcement
4 August 2026 | ASX: CRI
CRITICA LIMITED
Level 2, 16 Altona Street,
West Perth, Western
Australia ABN 51 119 678 385
T: +61 8 6279 9428
E: admin@critica.limited
critica.limited
Jupiter Hydromet Cuts Acid Consumption by ~30%
Refinement of Jupiter’s Hydrometallurgical Flowsheet confirms ~30% reduction
in acid consumption, reinforcing Jupiter's low-cost processing pathway
Critica Limited (ASX: CRI) (“Critica”or“the Company”) is pleased to announce a further significant
advancement in the hydrometallurgical optimisation programme for its Jupiter Rare Earth Project.
The latest work represents the next stage in the Company’s successful optimisation of the Jupiter processing
flowsheet, following the previously announced "Jupiter pilot optimisation delivers ~81% magnet rare earth
(MagREO) recovery, with continued improvement in beneficiation performance" on 14 April 2026 and "Jupiter
Pilot Plant Delivers ~14× Upgrade to ~3% TREO Concentrate, Reinforcing Low-Cost Beneficiation Pathway" on
27 May 2026.
Those programmes demonstrated improved rare earth recovery followed by a higher-grade intermediate
concentrate and increased mass rejection, materially reducing the volume of material reporting to downstream
processing. The Company's optimisation focus has subsequently extended to the downstream
hydrometallurgical circuit, including optimisation of sulphuric acid consumption during the acid bake process.
Jupiter Highlights
• Independent hydrometallurgical optimisation programmes undertaken by
ANSTO, GAVAQ and AMML have demonstrated sulphuric acid consumption
approximating 1.0 tonne of acid per tonne of feed can be successfully
achieved.
• Results represent a significant improvement in acid consumption, an
important reagent input into Jupiter's proposed hydrometallurgical
flowsheet.
• Results build on previously announced improvements in magnet rare earth
recovery and concentrate grade, continuing the successful optimisation of
the Jupiter processing flowsheet.
• Further hydrometallurgical optimisation and validation testwork remains
ongoing.
• The Jupiter Scoping Study is being finalised and remains targeted for release
in Q3 2026.
2
Critica’s CEO Jacob Deysel commented:
“Our approach has been to systematically optimise each stage of the Jupiter processing flowsheet and
these latest results represent another important step in that programme.
Following the improvements already demonstrated in magnet rare earth recovery and concentrate
grade, our downstream optimisation work is now demonstrating materially lower sulphuric acid
consumption. This is particularly important given the significance of acid consumption to the
hydrometallurgical processing cost.
Our objective has never been to optimise individual parts of the process in isolation. Success comes
from maintaining strong rare earth recoveries while systematically improving every stage of the
processing flowsheet. Pleasingly, ANSTO, GAVAQ and AMML have independently confirmed that acid
consumption of approximately one tonne of acid per tonne of feed can be achieved under optimised
conditions.
With optimisation now demonstrated across beneficiation recovery, concentrate grade and downstream
reagent consumption, we continue to strengthen the technical foundations of Jupiter as we finalise the
Scoping Study for release in Q3 2026."
What This Means for Jupiter
Sulphuric acid consumption is an important reagent input within Jupiter's proposed hydrometallurgical
flowsheet and therefore an important focus of the Company's ongoing metallurgical optimisation
programme.
The latest results continue a clear progression in the development of the Jupiter processing flowsheet:
95% mass reduction → Higher concentrate grade → Improved recovery → Reduced
downstream acid consumption
In April 2026, pilot beneficiation optimisation delivered approximately 81% MagREO recovery. Subsequent
optimisation announced in May 2026 produced an intermediate concentrate grading approximately 3%
TREO, representing an approximately 14× upgrade from feed, while rejecting approximately 95% of the
original feed mass.
The latest hydrometallurgical work extends this optimisation downstream by reducing the amount of
sulphuric acid required during the acid bake process. Lower acid consumption reduces reagent
requirements and associated processing costs. Further testwork is underway to validate and refine
operating conditions as the Company advances the Jupiter development programme.
Hydrometallurgical Optimisation
Parallel hydrometallurgical testwork programmes have been undertaken by the Australian Nuclear Science
and Technology Organisation (ANSTO), the Centre for Science and Technology of Mineral and Environment
(GAVAQ) and Australian Minmet Metallurgical Laboratories (AMML) as part of Critica's ongoing optimisation
of the Jupiter acid bake process.
The programmes have investigated acid addition and operating conditions with the objective of reducing
sulphuric acid consumption while maintaining appropriate rare earth extraction performance.
This equates to a reduction of approximately 30% in sulphuric acid consumption, from a reference basis of
approximately 1.4 tonnes to 1.6 tonnes of acid per tonne of feed to approximately 1.0 tonne of acid per
tonne of feed across the optimised range as announced 16 February 2026.
Testwork undertaken across the programmes has demonstrated sulphuric acid consumption within an
optimised range, with results down to approximately 1.0 tonne of sulphuric acid per tonne of feed. See
Table 1 below.
3
Comparable outcomes across independent testwork programmes provide further technical support for the
continued optimisation of the acid bake process.
Additional testwork remains underway to further refine operating parameters and validate performance
across a broader range of conditions.
Table 1: Bake test work acid consumption and REE extraction
Concentrate
composite
Feed TREO % Acid consumption
tonne per tonne feed
REE Extraction % Laboratory
QTE 1.3 1.0 >86 ANSTO
QTE 1.3 1.2 >90 ANSTO
QTE 1.3 1.4 >86 ANSTO
GP25E 1.0 1.0 90 GAVAQ
QTC 1.5 1.0 84 AMML
QTC 1.5 1.2 89 AMML
QTC 1.5 1.4 92 AMML
Notes: all bakes at 260° C for 3-4 hours using concentrated H2SO4
Next Steps
• Continue hydrometallurgical optimisation and validation testwork
• Further refine acid bake operating conditions and reagent consumption across feed material with
varying TREO grades.
• Continue downstream process optimisation and MREO product qualification activities
• Integrate ongoing metallurgical results into future engineering and project development work
• Finalise and release the Jupiter Scoping Study, targeted for Q3 2026
Authorised by the Board of Critica Limited.
4
Jacob Deysel
CEO
Critica Limited
Level 2, 16 Altona Street, West Perth, Western Australia
T: + 61 8 6279 9428 | admin@critica.limited | critica.limited
Investor and Media Relations
Dannika Warburton
investors@investability.com.au
JOIN CRITICA’S INTERACTIVE INVESTOR HUB
Sign up and engage with our investor relations team
BUILDING A CRITICAL MINERALS PLATFORM
RARE EARTHS | YTTRIUM | GALLIUM | TIN | TUNGSTEN
Critica Limited (ASX: CRI) is advancing a
portfolio of critical minerals projects with
exposure to commodities used in defence,
semiconductors, artificial intelligence,
advanced manufacturing and
electrification.
The Jupiter Project in Western Australia
provides exposure to rare earths, yttrium
and gallium, while the Mt Lindsay Project
in Tasmania provides exposure to tin and
tungsten.
Together, these projects provide exposure
to minerals essential to future industrial
growth and national security applications.
5
Competent Persons Statement
The information in this report that relates to exploration results including geology interpretation, data
preparation and data quality is based on work compiled by Dr. Stuart Owen who is a Member of the
Australian Institute of Geoscientists. Dr. Owen is a permanent employee of Critica Limited and has
sufficient experience that is relevant to the style of mineralisation and type of deposit under consideration
and to the activity which he is undertaking to qualify as Competent Person as defined in the 2012 Edition
of the Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves (JORC
code). Dr. Owen consents to the inclusion in the report of the matters based on his information in the form
and context in which they appear.
No new Mineral Resource information is contained in this report
All material assumptions and technical parameters underpinning the Minerals Resource Estimates
referred to within previous ASX announcements continue to apply and have not materially changed since
last reported. The company is not aware of any new information or data that materially affects the
information included in this announcement.
Forward Looking Statements
This ASX announcement contains certain statements that may constitute “forward looking statement”.
Such statements are only predictions and are subject to inherent risks and uncertainties, which could
cause actual values, results, performance achievements to differ materially from those expressed, implied
or projected in any forward looking statements.
Forward looking statements are statements that are not historical facts. Words such as “expect(s)”,
“feel(s)”,“believe(s)”,“will”,“may”,“anticipate(s)”and similar expressions are intended to identify forward-
looking statements. These statements include, but are not limited to statements regarding future
production, resources or reserves and exploration results. All such statements are subject to certain risks
and uncertainties, many of which are difficult to predict and generally beyond the control of the Company,
that could cause actual results to differ materially from those expressed in, or implied or projected by, the
forward-looking information and statements.
These risks and uncertainties include, but are not limited to: (i) those relating to the interpretation of drill
results, the geology, grade and continuity of mineral deposits and conclusions of economic evaluations,
(ii) risks relating to possible variations in reserves, grade, planned mining dilution and ore loss, or recovery
rates and changes in project parameters as plans continue to be refined, (iii) the potential for delays in
exploration or development activities or the completion of feasibility studies, (iv) risks related to
commodity price and foreign exchange rate fluctuations, (v) risks related to failure to obtain adequate
financing on a timely basis and on acceptable terms or delays in obtaining governmental approvals or in
the completion of development or construction activities, and (vi) other risks and uncertainties related to
the Company’s prospects, properties and business strategy. Our audience is cautioned not to place undue
reliance on these forward-looking statements that speak only as of the date hereof, and we do not
undertake any obligation to revise and disseminate forward-looking statements to reflect events or
circumstances after the date hereof, or to reflect the occurrence of or non-occurrence of any events.
The Company believes that it has a reasonable basis for making the forward-looking Statements in the
announcement based on the information contained in this and previous ASX announcements.
6
Table 2: Metallurgical drill sample listing
Concentrate Hole East
MGA50
GDA94
North
MGA50
GDA94
RL m Drill
type
Concentrate Hole East
MGA50
GDA94
North
MGA50
GDA94
RL m Drill
type
GP25E BRAC063 529492 6854087 347 AC GP25E BRRC061 530515 6857002 350 RC
GP25E BRAC064 528998 6855105 343 AC GP25E BRRC064 530496 6855093 350 AC
GP25E BRAC071 529741 6856998 350 AC GP25E BRRC068 530495 6853094 353 AC
GP25E BRAC077 529992 6856599 348 AC GP25E BRRC080 528998 6853109 346 AC
GP25E BRAC078 529744 6856604 349 AC GP25E JPAC003 529002 6857260 351 AC
GP25E & QTE BRAC085 531749 6855606 351 AC GP25E JPAC004 529492 6857006 350 AC
GP25E BRAC091 530251 6855600 346 AC GP25E JPAC005 529502 6856801 349 AC
GP25E BRAC092 529995 6855600 345 AC GP25E & QTE JPAC009 529252 6856340 348 AC
GP25E BRAC097 530747 6855100 350 AC GP25E & QTE JPAC028 529249 6854855 345 AC
GP25E BRAC098 530244 6855094 349 AC GP25E JPAC029 528997 6854842 344 AC
GP25E BRAC104 531498 6854599 355 AC GP25E & QTE JPAC030 528753 6854858 343 AC
GP25E BRAC105 531247 6854602 354 AC GP25E & QTE JPAC032 527757 6855097 341 AC
GP25E BRAC106 530995 6854601 353 AC GP25E & QTE JPAC034 527740 6854589 342 AC
GP25E & QTE BRAC108 530498 6854602 351 AC GP25E JPAC038 528755 6854351 343 AC
GP25E & QTE BRAC109 530247 6854599 349 AC GP25E & QTE JPAC059 526244 6853604 337 AC
GP25E BRAC113 531746 6854098 357 AC GP25E JPAC062 529496 6853348 348 AC
GP25E BRAC114 531245 6854104 355 AC GP25E JPAC063 529245 6853356 347 AC
GP25E BRAC117 529750 6854103 348 AC GP25E & QTE JPAC072 526247 6853353 337 AC
GP25E BRAC122 531246 6853598 356 AC GP25E JPAC073 529494 6852850 349 AC
GP25E BRAC124 530746 6853599 353 AC GP25E JPAC074 529252 6852856 348 AC
GP25E BRAC126 530241 6853597 351 AC GP25E JPAC077 527996 6852848 344 AC
GP25E BRAC129 529744 6853599 349 AC GP25E JPAC078 527746 6852847 343 AC
GP25E & QTE BRAC130 532246 6853102 362 AC GP25E JPAC081 526494 6852849 339 AC
GP25E BRAC135 530243 6853098 352 AC GP25E & QTE JPAC083 525997 6852856 337 AC
GP25E BRAC143 529995 6852601 351 AC GP25E & QTE JPAC085 529495 6852349 350 AC
GP25E & QTE BRAC147 530246 6852102 353 AC GP25E & QTE JPAC094 525745 6852330 337 AC
GP25E BRAC154 529496 6851595 351 AC GP25E JPAC105 527501 6851842 343 AC
GP25E & QTE BRAC156 529500 6850604 354 AC GP25E & QTE JPAC118 527004 6851353 342 AC
GP25E & QTE BRAC159 528749 6850600 351 AC GP25E & QTE JPAC130 524724 6850844 339 AC
GP25E & QTE BRAC163 527744 6850600 348 AC GP25E & QTE JPAC131 525505 6850830 339 AC
GP25E BRAC190 527244 6850191 347 AC GP25E & QTE JPAC140 528993 6850854 351 AC
GP25E BRAC191 527750 6850195 349 AC GP25E JPAC164 528502 6849996 352 AC
GP25E BRAC200 527245 6849800 349 AC GP25E JPAC165 528252 6849998 352 AC
GP25E & QTE BRAC210 526252 6851102 341 AC QTC JPAC184 531496 6852846 358 AC
GP25E & QTE BRAC215 524252 6851100 339 AC QTC JPAC186 531000 6852847 355 AC
GP25E BRAC225 525999 6851603 339 AC GP25E & QTE JPAC188 530492 6852846 353 AC
GP25E & QTE BRAC226 526246 6851602 340 AC GP25E & QTC JPAC190 530009 6852849 351 AC
GP25E BRAC229 526999 6851599 342 AC QTC JPAC196 530492 6853348 353 AC
GP25E BRAC233 527999 6851598 345 AC QTC JPAC199 529748 6853351 350 AC
GP25E & QTE BRAC234 528249 6851607 346 AC GP25E JPAC202 531241 6853842 355 AC
GP25E BRAC235 528496 6851601 347 AC GP25E JPAC203 530995 6853856 354 AC
GP25E & QTE BRAC236 528744 6851601 348 AC GP25E & QTE JPAC205 530489 6853852 351 AC
GP25E BRAC240 527750 6852095 344 AC GP25E JPAC209 531247 6854346 354 AC
GP25E BRAC241 527251 6852092 341 AC GP25E JPAC210 530994 6854347 353 AC
GP25E BRAC255 527496 6852602 341 AC GP25E JPAC217 531001 6854849 352 AC
GP25E BRAC258 526742 6852602 339 AC GP25E JPAC220 530248 6854849 349 AC
GP25E BRAC268 527750 6853103 341 AC GP25E & QTE JPAC221 529994 6854840 348 AC
GP25E & QTE BRAC272 525997 6853105 336 AC GP25E JPAC225 530495 6855345 349 AC
GP25E & QTE BRAC285 526752 6853601 339 AC GP25E JPAC226 530246 6855340 348 AC
GP25E & QTE BRAC287 528751 6854100 345 AC GP25E JPAC227 529998 6855348 347 AC
GP25E BRAC293 529001 6854605 344 AC GP25E & QTE JPAC229 531244 6855844 350 AC
GP25E & QTE BRAC294 528749 6854601 343 AC GP25E JPAC233 530251 6855849 347 AC
GP25E BRAC297 527995 6854601 342 AC GP25E JPAC239 530310 6855601 347 AC
GP25E & QTE BRAC298 529247 6855100 345 AC GP25E JPAC240 530202 6855592 346 AC
GP25E BRAC299 528750 6855101 343 AC GP25E JPAC241 530152 6855595 346 AC
GP25E & QTE BRAC301 529247 6855601 345 AC GP25E JPAC243 530048 6855595 346 AC
GP25E & QTE BRAC307 529251 6856102 347 AC GP25E JPAC245 529899 6855608 345 AC
GP25E BRRC011 529546 6853249 349 AC GP25E JPAC255 530481 6856795 349 AC
7
Concentrate Hole East
MGA50
GDA94
North
MGA50
GDA94
RL m Drill
type
Concentrate Hole East
MGA50
GDA94
North
MGA50
GDA94
RL m Drill
type
GP25E BRRC017 530173 6852567 352 AC GP25E JPAC257 529988 6856792 348 AC
GP25E BRRC018 530587 6852568 354 AC QTC JPD002 529217 6856098 347 DDH
GP25E & QTE BRRC046 527500 6850218 348 RC QTC JPD007 529733 6854108 348 DDH
GP25E & QTE BRRC047 526496 6850206 344 RC
8
Appendix One: JORC Code, 2012 Edition
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections)
Criteria JORC Code Explanation Commentary
Table
Sampling
techniques
• Nature and quality of sampling (e.g.: cut
channels, random chips, or specific
specialised industry standard
measurement tools appropriate to the
minerals under investigation, such as
down hole gamma sondes, or handheld
XRF instruments, etc.). These examples
should not be taken as limiting the broad
meaning of sampling.
• Measures taken to ensure sample
representivity and the appropriate
calibration of any measurement tools or
systems used.
• Aspects of the determination of
mineralisation that are Material to the
Public Report. In cases where ‘industry
standard’ work has been done this
would be relatively simple (e.g.: ‘reverse
circulation drilling was used to obtain 1
m samples from which 3 kg was
pulverised to produce a 30 g charge for
fire assay’). In other cases more
explanation may be required, such as
where there is coarse gold that has
inherent sampling problems. Unusual
commodities or mineralisation types
(e.g.: submarine nodules) may warrant
disclosure of detailed information.
• The Intermediate Rare Earth concentrates
used in the reported test work were
produced from beneficiated bulk sample
taken from 123 drill holes representing 2342
m as listed in Table 2 of this announcement
from within the Jupiter Inferred Resource
envelope.
Drilling
techniques
• Drill type (e.g.: core, reverse circulation,
open-hole hammer, rotary air blast,
auger, Bangka, sonic, etc..) and details
(e.g.: core diameter, triple or standard
tube, depth of diamond tails, face-
sampling bit or other type, whether core
is oriented and if so, by what method,
etc..).
• This metallurgical composite sample subject
of this report was selected from AC, RC and
DDC holes drilled by KTE Mining Services Pty
Ltd and DDH1 Drilling respectively.
• Sampling was conducted and supervised by
a suitably qualified Critica geologists and
field technicians.
Drill sample
recovery
• Method of recording and assessing core
and chip sample recoveries and results
assessed.
• Measures taken to maximise sample
recovery and ensure representative
nature of the samples.
• Whether a relationship exists between
sample recovery and grade and whether
sample bias may have occurred due to
preferential loss/gain of fine/coarse
material.
• The drill samples were visually assessed and
weighed, and recovery was considered
acceptable. Most of the holes encountered
water which only locally impacted sample
recovery
Logging • Whether core and chip samples have
been geologically and geotechnically
• The metallurgical composites were collected
from 85 mm AC and 4.5 inch RC holes drilled
9
Criteria JORC Code Explanation Commentary
logged to a level of detail to support
appropriate Mineral Resource
estimation, mining studies and
metallurgical studies.
• Whether logging is qualitative or
quantitative in nature. Core (or costean,
channel, etc.) photography.
• The total length and percentage of the
relevant intersections logged.
by KTE Mining Services using a KL 150 Air
Core rig and DB450 RC rig, and PQ diameter
DDC holes drilled by DDH1 with a Sandvik
DE840 truck mounted drill rig.
Sub-sampling
techniques and
sample
preparation
• If core, whether cut or sawn and
whether quarter, half or all core taken.
• If non-core, whether riffled, tube
sampled, rotary split, etc. and whether
sampled wet or dry.
• For all sample types, the nature, quality
and appropriateness of the sample
preparation technique.
• Quality control procedures adopted for
all sub-sampling stages to maximise
representivity of samples.
• Measures taken to ensure that the
sampling is representative of the in situ
material collected, including for instance
results for field duplicate/second-half
sampling.
• Whether sample sizes are appropriate to
the grain size of the material being
sampled.
• The metallurgical composites represent
2342 m from the 123 drill holes listed in
Table 2.
• Intervals selected from each drill hole
ranged from 4 to 40 m and were collected
by sampling spear from the bulk 1 m sample
bags, then homogenized, weighed and
dispatched to the GAVAQ Vietnam for
beneficiation to produce the intermediate
REE concentrates used in the acid bake
hydrometallurgical work reported.
Quality of assay
data and
laboratory tests
• The nature, quality and appropriateness
of the assaying and laboratory
procedures used and whether the
technique is considered partial or total.
• For geophysical tools, spectrometers,
handheld XRF instruments, etc., the
parameters used in determining the
analysis including instrument make and
model, reading times, calibrations
factors applied and their derivation, etc.
• Nature of quality control procedures
adopted (eg standards, blanks,
duplicates, external laboratory checks)
and whether acceptable levels of
accuracy (ie lack of bias) and precision
have been established.
• Assaying relevant to the reported
hydrometallurgical results was conducted at
ANSTO for QTE, GAVAQ and ALS
Geochemistry Perth for GP25E and ALS
Geochemistry Perth and Intertek Perth for
QTC using industry standard methods.
Certified reference materials reported
within expected ranges.
Verification of
sampling and
assaying
• The verification of significant
intersections by either independent or
alternative company personnel.
• The use of twinned holes.
• Documentation of primary data, data
entry procedures, data verification, data
storage (physical and electronic)
protocols.
• Discuss any adjustment to assay data.
• The results are compatible with observed
mineralogy.
• Primary data is stored and documented in
industry standard ways.
• The use of twinned holes is not relevant to
the reported metallurgical test work.
Location of data
points
• Accuracy and quality of surveys used to
locate drill holes (collar and down-hole
surveys), trenches, mine workings and
other locations used in Mineral Resource
• Drill hole locations were determined by
Differential GPS with sub-metre precision.
• The detail of geological logging, minerology
and geochemistry is appropriate for
10
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section)
Criteria JORC Code Explanation Commentary
Mineral tenement and
land tenure status
• Type, reference name/number,
location and ownership including
agreements or material issues
with third parties such as joint
ventures, partnerships,
overriding royalties, native title
interests, historical sites,
wilderness or national park and
environmental settings.
• The security of the tenure held
at the time of reporting along
with any known impediments to
obtaining a licence to operate in
the area.
• The Brothers REE Project consists of granted
Exploration Licences E59/2421, E59/2463,
E59/2710, E59/2711, E59/2819, E59/2821,
E59/2827, E59/2889, E59/2890, E59/2907,
E59/2927, E59/2928, E59/2930, E59/2977
and E58/629. All are 100% held by Tasmanian
Rare Earth Pty Ltd a wholly owned subsidiary
of Critica Limited.
Exploration done by
other parties
• Acknowledgment and appraisal
of exploration by other parties.
• Documented previous explorers within the
area now covered by the Brothers Project
include North Flinders Mines Ltd, CRA
Criteria JORC Code Explanation Commentary
estimation.
• Specification of the grid system used.
• Quality and adequacy of topographic
control.
exploration, resource definition and
metallurgical sample selection purposes.
Data spacing
and distribution
• Data spacing for reporting of Exploration
Results.
• Whether the data spacing and
distribution is sufficient to establish the
degree of geological and grade
continuity appropriate for the Mineral
Resource and Ore Reserve estimation
procedure(s) and classifications applied.
• Whether sample compositing has been
applied.
• The drill holes selected for the reported
metallurgical test work were part of Jupiter
exploration and resource definition
programs as previously reported to the ASX.
Orientation of
data in relation
to geological
structure
• Whether the orientation of sampling
achieves unbiased sampling of possible
structures and the extent to which this is
known, considering the deposit type.
• If the relationship between the drilling
orientation and the orientation of key
mineralised structures is considered to
have introduced a sampling bias, this
should be assessed and reported if
material.
• The metallurgical samples were collected by
sampling scoop from the bulk AC and RC
drill spoils and cut in continuous quarter
core intervals from the PQ diameter
Diamond Drill Core. The samples were
crushed as necessary, pulverized then
homogenized by mat rolling for supply to
the metallurgical laboratories.
Sample security • The measures taken to ensure sample
security.
• The chain of custody for the metallurgical
composite from collection to submission to
the metallurgical laboratory was managed
by Critica personnel. and the level of
security is considered appropriate.
Audits or reviews • The results of any audits or reviews of
sampling techniques and data.
• The drilling and sample selection was
monitored and reviewed by suitably
qualified Critica personnel.
11
Criteria JORC Code Explanation Commentary
Exploration Pty Ltd, Spark Energy Pty Ltd,
Arcadia Minerals Ltd, Babalya Gold Pty Ltd,
Burmine Ltd, Equigold NL, Equinox Resources
NL, Jervois Mining Ltd, Minjar Gold Pty Ltd,
Mount Magnet South NL, Sons of Gwalia Ltd
and David Ross.
• Refer to previous Critica Limited
announcements to the ASX and also available
from Home - Critica Limited
Geology • Deposit type, geological setting
and style of mineralisation.
• The Brothers REE exploration area is situated
within the Western Australian Archean
Yilgarn Craton and mostly comprises
Cenozoic cover sequence overlying an
extensive Archaean monzogranite complex
(the Big Bell suite).
Drill hole Information • A summary of all information
material to the understanding of
the exploration results including
a tabulation of the following
information for all Material drill
holes:
- easting and northing of the
drill hole collar
- elevation or RL (Reduced
Level – elevation above sea
level in metres) of the drill
hole collar
- dip and azimuth of the hole
- down hole length and
interception depth
- hole length.
• If the exclusion of this
information is justified on the
basis that the information is not
Material and this exclusion does
not detract from the
understanding of the report, the
Competent Person should clearly
explain why this is the case.
• Locations and intervals for the metallurgical
material used in the test work reported here
are listed in Table 2 of this announcement.
• Collar locations were determined by
Differential GPS to sub-metre accuracy.
• All coordinates and maps presented here are
in the MGA Zone 50 GDA94 system.
• Topographic control is provided by
Worldwide 3 arc second SRTM spot height
data.
• Refer to previous ASX announcements for
relevant intersections, assay results and
resource estimation.
Data aggregation
methods
• In reporting Exploration Results,
weighting averaging techniques,
maximum and/or minimum
grade truncations (e.g. cutting of
high grades) and cut-off grades
are usually Material and should
be stated.
• Where aggregate intercepts
incorporate short lengths of high
grade results and longer lengths
of low grade results, the
procedure used for such
aggregation should be stated and
some typical examples of such
aggregations should be shown in
detail.
• The assumptions used for any
reporting of metal equivalent
values should be clearly stated.
• Metal equivalents have not been applied.
• Refer to previous ASX announcements for
relevant Jupiter project intersections and
assay results.
• Standard element to oxide conversion factors
have been used and TREO was calculated on
an unrounded basis.
La2O
3
1.173 Tb4O7 1.176
CeO2 1.228 Dy2O3 1.148
Pr6O
11
1.208 Ho2O3 1.146
Nd2O
3
1.166 Er2O3 1.143
Sm2O
3
1.16 Tm2O3 1.142
Eu2O
3
1.158 Yb2O3 1.139
Gd2O
3
1.153 Lu2O3 1.137
Y2O3 1.27
12
Criteria JORC Code Explanation Commentary
Relationship between
mineralisation widths
and intercept lengths
• These relationships are
particularly important in the
reporting of Exploration Results.
• If the geometry of the
mineralisation with respect to
the drill hole angle is known, its
nature should be reported.
• If it is not known and only the
down hole lengths are reported,
there should be a clear
statement to this effect (e.g.
‘down hole length, true width
not known’).
• The intersected clay and saprolite zones
blanket weathered granitoid basement such
that downhole thickness approximate true
thickness.
Diagrams • Appropriate maps and sections
(with scales) and tabulations of
intercepts should be included for
any significant discovery being
reported. These should include
but not be limited to a plan view
of drill hole collar locations and
appropriate sectional views.
• Metallurgical sample locations are given in
Table 2.
• Refer to previous Critica announcements to
the ASX for block model plans and sections,
also available from http://critica.limited.
Balanced reporting • Where comprehensive reporting
of all Exploration Results is not
practicable, representative
reporting of both low and high
grades and/or widths should be
practiced to avoid misleading
reporting of Exploration Results.
• Refer to previous ASX announcements for
relevant Jupiter project drill intersections and
resource estimation.
Other substantive
exploration data
• Other exploration data, if
meaningful and material, should
be reported including (but not
limited to): geological
observations
Share your feedback
Discover